Bajrang Enviro Engineer



Fine Bubble Tube Diffuser


Fine Bubble Tube Diffuser

Designed under the guidance of expert professionals, the Fine Bubble Tube Diffuser offered by the company is acknowledged by its sophisticated design. Owing to its reliable diffusion technique, this Fine Bubble Tube Diffuser remits excellent performance. This Fine Bubble Tube Diffuser is highly cost-effective in nature.

Appreciated For :

  • Abrasion resistant
  • Corrosion resistant
  • Temperature resistant
  • Mechanical strength
  • Easy Installation


Demanded For :

  • Oxygenation for pharmaceuticals
  • Water and waste water diffusion
  • Aquaculture diffusion
  • Gas diffusion


Specifications

Sizes 63mm X 630mm 63mm X 1000mm 90mm X 500mm 90mm X 1000mm
Shape of Diffuser Tube Type Tube Type Tube Type Tube Type
Type of Bubble Fine bubble Fine bubble Fine bubble Fine bubble
MOC of Membrane Epdm / silicon Epdm / silicon Epdm / silicon Epdm / silicon
Detail of Fittings per diffuser Pipe support, S.S. membrane clips 2 No male adaptors, 1No S S nipple Pipe support, S.S. membrane clips 2 No male adaptors, 1No S S nipple Pipe support, S.S. membrane clips 2 No male adaptors, 1No S S nipple Pipe support, S.S. membrane clips 2 No male adaptors, 1No S S nipple
MOC of Membrane Support PVC Pipe PVC Pipe PVC Pipe PVC Pipe
MOC of Membrane Clips SS SS SS SS
MOC of Dummy Cap ABS ABS ABS ABS
MOC of Diffuser Male Adapter ABS ABS ABS ABS
Operating Temperature of Membrane 85 deg. Celsius 85 deg. Celsius 85 deg. Celsius 85 deg. Celsius
Temperature Tolerance Max. 85 degree Celsius Max. 85 degree Celsius Max. 85 degree Celsius Max. 85 degree Celsius
Nipple attached to diffuser ¾" x 3" ¾" x 3" 1"x3" 1"x3"
Dimensions of Bubble >1mm >1mm >1mm >1mm
Air floating Both side Both side Both side Both side
Membrane surface area 0.13m2 0.21m2 0.14m2 0.29m2
Air put through rate 4 to 6m3/hr. 8 to 10 m3/hr. 5 to 7 m3/hr. 11 to 14 m3/hr.